Type
Reason
Times
Source
Entries
Search for an entry
On Friday, November 13, Starship lifted off from Starbase, Texas on its 15th flight. And on Saturday, November 14, Starship returned to Starbase, Texas, and changed everything.
Flight 15 started with the Super Heavy booster ascending away from Pad 2 at Starbase under the power of 33 Raptor engines. The successful first-stage ascent was followed by hot-staging and Starship continuing its path to space with six Raptor engines.
The booster performed its directional flip maneuver and relit 32 of the planned 33 Raptor engines for the boostback burn. The boostback burn ended early due to low fuel mass, with the root cause under investigation. The booster’s guidance, navigation and control triggered an automated abort during coast and diverted itself successfully to an offshore landing location. It successfully executed a landing burn with the engines cutting off while hovering over the Gulf. Upon landing burn shutdown, the Super Heavy’s flight termination system was triggered.
Starship completed a nominal ascent burn and entered into a brief coast before reigniting a single Raptor engine for an orbital insertion burn.
After making it to orbit, Starship deployed 26 Starlink V3 satellites. Contact was made soon after with every satellite which are already beginning to raise their orbits to join the Starlink constellation.
Following payload deploy, Starship entered into a long coast phase around Earth. After monitoring its systems for more than 20 hours in space, the SpaceX flight control team prepared to return Starship to the launch site.
Starship successfully relit a single Raptor sea-level engine and performed a deorbit burn, breaking out of orbit and beginning its path through Earth’s atmosphere.
Starship navigated its way back to the east coast of Texas, flew a final swoosh maneuver out over the Gulf, and approached the same launch site it had just left 22.5 hours prior. After breaking through the clouds, three Raptor engines ignited for a landing flip and slow descent into Mechazilla’s waiting arms, which closed to catch Starship for the very first time.
On Friday, November 13, Starship lifted off from Starbase, Texas on its 15th flight. And on Saturday, November 14, Starship returned to Starbase, Texas, and changed everything.
Flight 15 started with the Super Heavy booster ascending away from Pad 2 at Starbase under the power of 33 Raptor engines. The successful first-stage ascent was followed by hot-staging and Starship continuing its path to space with six Raptor engines.
The booster performed its directional flip maneuver and relit 32 of the planned 33 Raptor engines for the boostback burn. The boostback burn ended early due to low fuel mass, with the root cause under investigation. The booster's guidance, navigation and control triggered an automated abort during coast and diverted itself successfully to an offshore landing location. It successfully executed a landing burn with the engines cutting off while hovering over the Gulf. Upon landing burn shutdown, the Super Heavy's flight termination system was triggered.
Starship completed a nominal ascent burn and entered into a brief coast before reigniting a single Raptor engine for an orbital insertion burn.
After making it to orbit, Starship deployed 26 Starlink V3 satellites. Contact was made soon after with every satellite which are already beginning to raise their orbits to join the Starlink constellation.
Following payload deploy, Starship entered into a long coast phase around Earth. After monitoring its systems for more than 20 hours in space, the SpaceX flight control team prepared to return Starship to the launch site.
Starship successfully relit a single Raptor sea-level engine and performed a deorbit burn, breaking out of orbit and beginning its path through Earth's atmosphere.
Starship navigated its way back to the east coast of Texas, flew a final swoosh maneuver out over the Gulf, and approached the same launch site it had just left 22.5 hours prior. After breaking through the clouds, three Raptor engines ignited for a landing flip and slow descent into Mechazilla's waiting arms, which closed to catch Starship for the very first time.
1 days, 18 hours, 37 minutes
On Friday, November 13, Starship lifted off from Starbase, Texas on its 15th flight. And on Saturday, November 14, Starship returned to Starbase, Texas, and changed everything.
Flight 15 started with the Super Heavy booster ascending away from Pad 2 at Starbase under the power of 33 Raptor engines. The successful first-stage ascent was followed by hot-staging and Starship continuing its path to space with six Raptor engines.
The booster performed its directional flip maneuver and relit 32 of the planned 33 Raptor engines for the boostback burn. The boostback burn ended early due to low fuel mass, with the root cause under investigation. The booster’s guidance, navigation and control triggered an automated abort during coast and diverted itself successfully to an offshore landing location. It successfully executed a landing burn with the engines cutting off while hovering over the Gulf. Upon landing burn shutdown, the Super Heavy’s flight termination system was triggered.
Starship completed a nominal ascent burn and entered into a brief coast before reigniting a single Raptor engine for an orbital insertion burn.
After making it to orbit, Starship deployed 26 Starlink V3 satellites. Contact was made soon after with every satellite which are already beginning to raise their orbits to join the Starlink constellation.
Following payload deploy, Starship entered into a long coast phase around Earth. After monitoring its systems for more than 20 hours in space, the SpaceX flight control team prepared to return Starship to the launch site.
Starship successfully relit a single Raptor sea-level engine and performed a deorbit burn, breaking out of orbit and beginning its path through Earth’s atmosphere.
Starship navigated its way back to the east coast of Texas, flew a final swoosh maneuver out over the Gulf, and approached the same launch site it had just left 22.5 hours prior. After breaking through the clouds, three Raptor engines ignited for a landing flip and slow descent into Mechzilla’s waiting arms, which closed to catch Starship for the very first time.
Flight 15 of Starship is preparing to launch as soon as Friday, November 13, pending regulatory approval. The 75-minute launch window will open at 4:45 p.m. CT.
A live webcast of the flight will begin about 30 minutes before liftoff, which you can watch here and on X @SpaceX. Coverage is planned to continue through ship catch, with the potential for hours of live views from Starship as it orbits Earth, powered by Starlink. As is the case with all launches, the schedule is dynamic and likely to change, so be sure to check in here and stay tuned to our X account for updates.
The upcoming flight is planned to be the first to return both Starship and Super Heavy to the launch site for catch. If successful, this will mark the first full recovery of an orbital launch system and a breakthrough moment in making Starship a reliable, rapidly reusable rocket.
Starship’s initial return to launch site mission is expected to orbit the Earth at an altitude of ~275 km and complete approximately 14 orbits around the planet over the course of a more than 22-hour flight. Similar to Starship’s first orbital mission, the flight profile has been designed with the opportunity to insert into a passively safe suborbital trajectory or safely deorbit at multiple pre-determined areas over the ocean after raising to an orbital altitude. Read more about the testing, mission design, and safety measures for first planned Starship catch.
Starship’s previous mission was the culmination of more than a dozen flight tests and years of development, sending Starship to orbit and deploying meaningful payloads to space for the first time. Watch “Go For Orbit”, the latest episode in the ongoing Starship series experience the moments behind flying the most ambitious Starship mission yet.
The booster’s primary objective on Flight 15 will be executing a successful launch, ascent, stage separation, boostback burn, and return to the launch site for catch. This will be the first return and catch attempt for a Super Heavy V3 booster. Three V1 boosters were successfully caught on earlier flight tests with two demonstrating successful reflights.
The Starship upper stage’s primary objectives include the deployment of 26 Starlink V3 satellites and the first return to launch site and catch at Starbase. Starship will only execute a return to launch site if the flight control team has ensured that the vehicle systems critical for reentry maneuvers and final landing burn and tower approach are healthy.
Starship will deliver 26 Starlink V3 satellites to orbit, which aim to greatly expand the network's capacity and user speeds. Each Starlink V3 satellite will add 1 Terabit of capacity to the constellation, with all 26 satellites equaling ~10 Starlink V2 Mini launches on Falcon 9.
After deploying from Starship, the Starlink V3 satellites will unfold their antennas and deploy their solar arrays and make initial contact with the ground and the rest of the Starlink constellation via radio frequency and laser links. The satellites will then begin raising their orbits with their onboard thrusters. Following their on-orbit checkouts, the satellites should begin serving customers as soon as a few weeks after launch.
Three of the satellites have been modified with a suite of cameras to scan Starship’s heatshield and transmit imagery down to operators. This method of analyzing Starship’s heatshield has been tested on previous flights and is one of several data sources to help inform Starship’s readiness to return to the launch site on Flight 15.
Starship’s heatshield will incorporate the improvements made on Flight 14 including additional retention mechanisms on tiles in areas deemed to be at highest risk of falling off during ascent and addressing areas with a flow path for plasma to get behind the tiles. The vehicle will also have a large portion of the heatshield equipped with a curved tile design that has shown the ability to reduce heating in the gaps between tiles.
7 days, 6 hours, 57 minutes
Flight 15 of Starship is preparing to launch as soon as Friday, November 13, pending regulatory approval. The 75-minute launch window will open at 4:45 p.m. CT.
A live webcast of the flight will begin about 30 minutes before liftoff, which you can watch here and on X @SpaceX. Coverage is planned to continue through ship catch, with the potential for hours of live views from Starship as it orbits Earth, powered by Starlink. As is the case with all launches, the schedule is dynamic and likely to change, so be sure to check in here and stay tuned to our X account for updates.
The upcoming flight is planned to be the first to return both Starship and Super Heavy to the launch site for catch. If successful, this will mark the first full recovery of an orbital launch system and a breakthrough moment in making Starship a reliable, rapidly reusable rocket.
Starship’s initial return to launch site mission is expected to orbit the Earth at an altitude of ~275 km and complete approximately 14 orbits around the planet over the course of a more than 22-hour flight. Similar to Starship’s first orbital mission, the flight profile has been designed with the opportunity to insert into a passively safe suborbital trajectory or safely deorbit at multiple pre-determined areas over the ocean after raising to an orbital altitude. Read more about the testing, mission design, and safety measures for first planned Starship catch.
Starship’s previous mission was the culmination of more than a dozen flight tests and years of development, sending Starship to orbit and deploying meaningful payloads to space for the first time. Watch “Go For Orbit”, the latest episode in the ongoing Starship series experience the moments behind flying the most ambitious Starship mission yet.
The booster’s primary objective on Flight 15 will be executing a successful launch, ascent, stage separation, boostback burn, and return to the launch site for catch. This will be the first return and catch attempt for a Super Heavy V3 booster. Three V1 boosters were successfully caught on earlier flight tests with two demonstrating successful reflights.
The Starship upper stage’s primary objectives include the deployment of 26 Starlink V3 satellites and the first return to launch site and catch at Starbase. Starship will only execute a return to launch site if the flight control team has ensured that the vehicle systems critical for reentry maneuvers and final landing burn and tower approach are healthy.
Starship will deliver 26 Starlink V3 satellites to orbit, which aim to greatly expand the network's capacity and user speeds. Each Starlink V3 satellite will add 1 Terabit of capacity to the constellation, with all 26 satellites equaling ~10 Starlink V2 Mini launches on Falcon 9.
After deploying from Starship, the Starlink V3 satellites will unfold their antennas and deploy their solar arrays and make initial contact with the ground and the rest of the Starlink constellation via radio frequency and laser links. The satellites will then begin raising their orbits with their onboard thrusters. Following their on-orbit checkouts, the satellites should begin serving customers as soon as a few weeks after launch.
Three of the satellites have been modified with a suite of cameras to scan Starship’s heatshield and transmit imagery down to operators. This method of analyzing Starship’s heatshield has been tested on previous flights and is one of several data sources to help inform Starship’s readiness to return to the launch site on Flight 15.
Starship’s heatshield will incorporate the improvements made on Flight 14 including additional retention mechanisms on tiles in areas deemed to be at highest risk of falling off during ascent and addressing areas with a flow path for plasma to get behind the tiles. The vehicle will also have a large portion of the heatshield equipped with a curved tile design that has shown the ability to reduce heating in the gaps between tiles.